Safetread™ Non-Slip Products

Technical Information

The Safetread™ Non-Slip Stair and Flooring System is manufactured with high quality fibreglass impregnated with isophthalic resin. An inseperable bond is created between the silicon oxide and the glass reinforced plastic (GRP), ensuring a long-term integrity of the slip resistant surface. It offers good thermal shock and corrosion resistance. Each sheet is finished with a high performance polymetric coating system, that offers outstanding abrasion and chemical resistance.

Advantages

  • Resistant to general wear and tear
  • Chemical Resistant
  • Slip Resistant - even in wet conditions
  • Easy to install
  • Lightweight - each standard sheet weighs less than 20kg

    • Maintenance / Cleaning

  • Remove spills immediately from the surface, washing with water
  • Pressure wash on low setting periodically to remove dirt from between grit
  • Check regularly for damage and arrange for repair as required

    • Tests

    All grip grades of Safetread™ Non-Slip Stair and Flooring System sheets have surpassed the minimum requirements of the 'low potential slip' rating specified by the UK Slip Resistance Group Guide 2000. Please see below for details.

    Slip Risk Classification based on Pendulum Test Values

    Pendulum Value
    Slip Risk
    0-24
    High
    25-35
    Moderate
    36-64
    Low
    65+
    Extremely Low

    Results

    Dry Reading - 73
    Wet Reading - 64

    Download PDFs

    HSL Report
    Edge Safe
    Flat Sheet
    Stair Treads

    Please note:

    Detail on this website is subject to change and is not intended, nor should be construed, as forming part of any contract whatesoever. Representations are only typical.

    All sizes are nominal.